Blasts from the past. Back in the day (think 30-40 years ago), if you wanted to connect to another computer over the phone lines you would get a Hayes (or Hayes compatible) modem (yes, okay there were some non-Hayes compatible modem out there, but), then connect that to your IBM, Commodore, Atari, Apple, or .... computer, run a terminal program, type a command along the lines of ATDP5551212 (or whatever) to get your computer to connect to a local electronic BBS (Bulletin Board System) (likely NOT Internet connected). In its own way, back in the day it was all good (legal) fun. I was reminded of the above due to another blast from the past recently. I ran across the current issue of "2600" magazine for sale at an Indigo Bookstore. Back in the day "2600" carried articles about things you could do of ...questionable legality... with the telephone network. You get the impression that phone ...tricks.... are still an area that would be happy to write about. What drew my attention in the current issue of "2600" was an article titled "Bulletin Board Systems Are Back!". In summary, it went into using an ESP8266 (think an earlier/cheaper version of an ESP32, semi-Arduino compatible module with built-in WiFi) as what would appear to your computer as a Hayes compatible modem. You do need to assemble an ESP8266 module and an RS232 to TTL module total cost if ordered from one of the usual suspects (like AliExpress in China) under $10. Assemble the parts, install the appropriate software (which they identify in the article) and you can connect to any computer on the internet that supports telnet connections (these days, most don't). Still this does mean even machines like the Commodore 64, Atari 800 or other machines of that vintage can (with an RS232 adapter) can (conditionally) connect to the Internet or they can host a BBS. Neat stuff...
Oh the memories. I had a Hayes modem and an IBM PC..ATDT1234567. I was dialing into York U's bank of modems, but they were usually all busy, so I wrote a little program to auto-dial, and then call me with an alarm once I connected. Memories. On Sun, 20 Sept 2026 at 20:27, Colin McGregor via Talk < talk@lists.gtalug.org> wrote:
Blasts from the past. Back in the day (think 30-40 years ago), if you wanted to connect to another computer over the phone lines you would get a Hayes (or Hayes compatible) modem (yes, okay there were some non-Hayes compatible modem out there, but), then connect that to your IBM, Commodore, Atari, Apple, or .... computer, run a terminal program, type a command along the lines of ATDP5551212 (or whatever) to get your computer to connect to a local electronic BBS (Bulletin Board System) (likely NOT Internet connected). In its own way, back in the day it was all good (legal) fun.
I was reminded of the above due to another blast from the past recently. I ran across the current issue of "2600" magazine for sale at an Indigo Bookstore. Back in the day "2600" carried articles about things you could do of ...questionable legality... with the telephone network. You get the impression that phone ...tricks.... are still an area that would be happy to write about. What drew my attention in the current issue of "2600" was an article titled "Bulletin Board Systems Are Back!". In summary, it went into using an ESP8266 (think an earlier/cheaper version of an ESP32, semi-Arduino compatible module with built-in WiFi) as what would appear to your computer as a Hayes compatible modem. You do need to assemble an ESP8266 module and an RS232 to TTL module total cost if ordered from one of the usual suspects (like AliExpress in China) under $10. Assemble the parts, install the appropriate software (which they identify in the article) and you can connect to any computer on the internet that supports telnet connections (these days, most don't).
Still this does mean even machines like the Commodore 64, Atari 800 or other machines of that vintage can (with an RS232 adapter) can (conditionally) connect to the Internet or they can host a BBS. Neat stuff... ------------------------------------ Description: GTALUG Talk Unsubscribe via Talk-unsubscribe@lists.gtalug.org Start a new thread: talk@lists.gtalug.org This message archived at https://lists.gtalug.org/archives/list/talk@lists.gtalug.org/message/SDLZNAU...
Talk about Hayes refers to 1200 baud (or faster), right? Ah, you young people. Anybody remember 300 baud days? And especially the Potomic Micro Magic PMMI-103 modem that would squeeze 600 baud out of the 300 baud spec, running on S-100? A few CBBSes would negotiate that rate. That modem was the first thing I bought, signing up for a pre-sale discount at a Chicago Area Computer Hobbyist Exchange (CACHE) meeting. After I received it, I waited till there was an S-100 adapter offered for the TRS-80 Model 1, but that was a fraud; I had to wait till another came out. Talk about fun. Modifying S-100 printer and disk controllers to look like TRS-80, and programming modem drivers in hex to connect it to BASIC. Also putting 64K memory into the base unit and programming the extra 16K as a printer buffer. Carey
On 09/20/2026 7:41 PM CDT Don Tai via Talk <talk@lists.gtalug.org> wrote:
Oh the memories. I had a Hayes modem and an IBM PC..ATDT1234567. I was dialing into York U's bank of modems, but they were usually all busy, so I wrote a little program to auto-dial, and then call me with an alarm once I connected. Memories.
On Sun, 20 Sept 2026 at 20:27, Colin McGregor via Talk <talk@lists.gtalug.org mailto:talk@lists.gtalug.org> wrote:
Blasts from the past. Back in the day (think 30-40 years ago), if you wanted to connect to another computer over the phone lines you would get a Hayes (or Hayes compatible) modem (yes, okay there were some non-Hayes compatible modem out there, but), then connect that to your IBM, Commodore, Atari, Apple, or .... computer, run a terminal program, type a command along the lines of ATDP5551212 (or whatever) to get your computer to connect to a local electronic BBS (Bulletin Board System) (likely NOT Internet connected). In its own way, back in the day it was all good (legal) fun.
I was reminded of the above due to another blast from the past recently. I ran across the current issue of "2600" magazine for sale at an Indigo Bookstore. Back in the day "2600" carried articles about things you could do of ...questionable legality... with the telephone network. You get the impression that phone ...tricks.... are still an area that would be happy to write about. What drew my attention in the current issue of "2600" was an article titled "Bulletin Board Systems Are Back!". In summary, it went into using an ESP8266 (think an earlier/cheaper version of an ESP32, semi-Arduino compatible module with built-in WiFi) as what would appear to your computer as a Hayes compatible modem. You do need to assemble an ESP8266 module and an RS232 to TTL module total cost if ordered from one of the usual suspects (like AliExpress in China) under $10. Assemble the parts, install the appropriate software (which they identify in the article) and you can connect to any computer on the internet that supports telnet connections (these days, most don't).
Still this does mean even machines like the Commodore 64, Atari 800 or other machines of that vintage can (with an RS232 adapter) can (conditionally) connect to the Internet or they can host a BBS. Neat stuff... ------------------------------------ Description: GTALUG Talk Unsubscribe via Talk-unsubscribe@lists.gtalug.org mailto:Talk-unsubscribe@lists.gtalug.org Start a new thread: talk@lists.gtalug.org mailto:talk@lists.gtalug.org This message archived at https://lists.gtalug.org/archives/list/talk@lists.gtalug.org/message/SDLZNAU...
------------------------------------ Description: GTALUG Talk Unsubscribe via Talk-unsubscribe@lists.gtalug.org Start a new thread: talk@lists.gtalug.org This message archived at https://lists.gtalug.org/archives/list/talk@lists.gtalug.org/message/3Z3FD26...
On 9/21/26 7:26 AM, CAREY SCHUG via Talk wrote:
Anybody remember 300 baud days?
Yep. My first modem was a 300B manual. There's a bit of a story about how I got it. One day, my wife was in the office and I showed her the Adventure game on a VAX 11/780. She asked if she could play it on my computer, an IMSAI 8080. I said no, but if we had a modem... 😉
On Mon, 21 Sep 2026 06:26:47 -0500 (CDT) CAREY SCHUG via Talk <talk@lists.gtalug.org> wrote:
Talk about Hayes refers to 1200 baud (or faster), right? Ah, you young people.
Anybody remember 300 baud days? And especially the Potomic Micro Magic PMMI-103 modem that would squeeze 600 baud out of the 300 baud spec, running on S-100? A few CBBSes would negotiate that rate.
Carey, I remember 300 baud modems. I can read at 300 baud. I still have a USRobotics 56K modem, although it is turned off almost all the time. My physician does not have email, and she is hard to communicate with. She does have a fax. -- Howard Gibson hgibson@eol.ca http://home.eol.ca/~hgibson
From: CAREY SCHUG via Talk <talk@lists.gtalug.org>
Talk about Hayes refers to 1200 baud (or faster), right? Ah, you young people.
The first terminal I owned was a clone of an IBM 2741, with a built-in modem. Think of an IBM Selectric typewriter turned into a terminal. It ran at 110 bits/second. That was a limitation of the typewriter; the modem itself could run at 300 bits/second but there was no connector with which to access it (we did access it with jumper wires).
Anybody remember 300 baud days? And especially the Potomic Micro Magic PMMI-103 modem that would squeeze 600 baud out of the 300 baud spec, running on S-100? A few CBBSes would negotiate that rate. That modem was the first thing I bought, signing up for a pre-sale discount at a Chicago Area Computer Hobbyist Exchange (CACHE) meeting.
I don't remember this 600 baud rate. From Wikipedia: The (US) Bell 101 data set (introduced 1958) was 110 bits/second. It was used by the SAGE for North American air defense. https://en.wikipedia.org/wiki/Bell_101 https://en.wikipedia.org/wiki/Semi-Automatic_Ground_Environment The (US) Bell 103 (1963) modem was what made the 300 bits/second standard. https://en.wikipedia.org/wiki/Bell_103 The Bell 202 (1976) modem is what made 1200 bits/second standard. https://en.wikipedia.org/wiki/Bell_202 CACHE was pretty historic. The first BBS was from members Ward Christensen and Randy Suess. https://en.wikipedia.org/wiki/Bulletin_board_system
After I received it, I waited till there was an S-100 adapter offered for the TRS-80 Model 1, but that was a fraud; I had to wait till another came out. Talk about fun. Modifying S-100 printer and disk controllers to look like TRS-80, and programming modem drivers in hex to connect it to BASIC. Also putting 64K memory into the base unit and programming the extra 16K as a printer buffer.
Wow. How did you access 64k of RAM when some of the address space was for the ROM? I seem to remember the ROM was at low addresses, complicating CP/M. Often i8080 and Z80 interrupt hardware injected RST instructions. These were 1 byte instructions that could call instructions in one of 8 locations, 8 bytes apart, starting at 0. Fixing the content of those locations as ROM might be a problem. Surprisingly, interrupts weren't very important in PC operating systems in that era. Certainly the main program I wrote for that architecture wanted to control that memory -- a 1-byte subroutine call is quite a bit more compact than a 3-byte call.
On 09/23/2026 8:54 AM CDT D. Hugh Redelmeier via Talk <talk@lists.gtalug.org> wrote:
The (US) Bell 103 (1963) modem was what made the 300 bits/second standard. https://en.wikipedia.org/wiki/Bell_103
I don't know how they did it, since that is less than one sine wave for some tones, but they did. Maybe using the slop of the wave?
CACHE was pretty historic. The first BBS was from members Ward Christensen and Randy Suess. https://en.wikipedia.org/wiki/Bulletin_board_system
yes, and their system could handle 600 BAUD. And i think they had the first multi-user BBS later. I have printed session logs and (if readable) logs on 5.25" trs-80 formatted disks. also other early BBS systems, mostly apple based ones, as my friends at the time were mostly apple 2.
Wow. How did you access 64k of RAM when some of the address space was for the ROM? I seem to remember the ROM was at low addresses, complicating CP/M.
I bank swapped the first 16k with the extra memory. as a printer buffer, I only needed it for a moment, when fetching/storing to the buffer. The hard part was removing power from the sockets to add the xtra address line and put in 64k drams. I also planned the hardware to bank swap the 64k 4 times with 256k drams, but didn't feel up to programming the extra 192k as a ram-disk I also toyed with trying to run real CP/M, but, again, initializing the system with a radio shack disk then having to modify cp/m from 8 inch disks was never gotten around to before I bought my first IBM PC clone, and the TRS-80 lost its floppy drives to the IBM. It would have taken a lot of modifications to cp/m to bank swap in the keyboard and display as needed, and iirc cp/m kinda counted on a 24x80 display
On 9/23/26 10:24 AM, CAREY SCHUG via Talk wrote:
I don't know how they did it, since that is less than one sine wave for some tones, but they did. Maybe using the slop of the wave?
Phase encoding was used for higher speed modems. They even had versions that ran multiple bits per baud.
the specifications for the board said it used the same tones as the 300 baud standard. Carey
On 09/23/2026 10:49 AM CDT James Knott via Talk <talk@lists.gtalug.org> wrote:
On 9/23/26 10:24 AM, CAREY SCHUG via Talk wrote:
I don't know how they did it, since that is less than one sine wave for some tones, but they did. Maybe using the slop of the wave?
Phase encoding was used for higher speed modems. They even had versions that ran multiple bits per baud.
------------------------------------ Description: GTALUG Talk Unsubscribe via Talk-unsubscribe@lists.gtalug.org Start a new thread: talk@lists.gtalug.org This message archived at https://lists.gtalug.org/archives/list/talk@lists.gtalug.org/message/LODU3OO...
"Back in the day" (circa late 1970s) I built a Bell 103 compatible modem using a bare circuit board that someone was selling and had advertised it on a BBS. It was based on the Motorola MC6860 modem chip, which could do 600 baud. https://datasheet.octopart.com/MC6860P-Motorola-datasheet-180798513.pdf For anyone interested, I took some photos of it today and put them on my website. (Sorry, just raw jpegs) https://www.mlxxxp.ca/electronics/modem/ -- Scott
From: Scott Allen via Talk <talk@lists.gtalug.org>
Subject: [GTALUG] Re: Blasts from the past... 600 BAUD, CACHE & 64K in trs-80
"Back in the day" (circa late 1970s) I built a Bell 103 compatible modem using a bare circuit board that someone was selling and had advertised it on a BBS.
Wow! Nice.
On Wed, 23 Sept 2026 at 11:53, Scott Allen <mlxxxp@gmail.com> wrote:
"Back in the day" (circa late 1970s) I built a Bell 103 compatible modem
Correction: Circa early 1980s. Some of the components have a 1981 date code.
For anyone interested, I took some photos of it today and put them on my website. (Sorry, just raw jpegs)
I had Google Gemini AI create a bash script to generate a simple HTML/CSS gallery for the images. https://www.mlxxxp.ca/electronics/modem/ -- Scott
On Wed, 23 Sept 2026 at 09:55, D. Hugh Redelmeier via Talk <talk@lists.gtalug.org> wrote:
I don't remember this 600 baud rate.
As Carey implied, the 600 baud rate was simply running a standard Bell 103 compatible 300 baud modem at 600 baud. Since the protocol was simple frequency shift keying, you would get half the number of cycles for the given frequency for one bit time but many modems could latch on to this. In theory, a Bell 103 compatible modem that could handle 600 baud could work at any rate between something below 300 baud (maybe with no lower limit) and 600 baud (or even a bit higher than 600 baud), as long as the sending and receiving UART were set to that same baud rate. -- Scott
From: James Knott via Talk <talk@lists.gtalug.org>
Are you sure about that? IBM terminals ran EBCDIC at 134.5B, IIRC.
You are right: 134.5 b/s, 15 characters/second (1 start bit, 7 Tilt/Rotate bits, 1 stop bit). 110 b/s was Teletypes (10 characters/second, 11 bits per character (1 start bit, 8-bit ASCII, 2 stop bits)/ The code for IBM 2741 terminals was "tilt rotate" code. It specified how much to tilt the type-ball and how much to rotate it. There was a code for shift and one for shift release, which rotated the type-ball 180 degrees. Some systems, to show they were alive when they had nothing to report, would rotate the type ball without typing anything. I think Stanford's Wylbur did this. https://en.wikipedia.org/wiki/ORVYL_and_WYLBUR You can see a bit about the 2741 on the University of Waterloo's Computer Museum site: https://uwaterloo.ca/computer-museum/blog/type-ball-test (I used real 2741s at Waterloo; I later bought a clone that York sold off.)
On 9/23/26 2:51 PM, D. Hugh Redelmeier wrote:
110 b/s was Teletypes (10 characters/second, 11 bits per character (1 start bit, 8-bit ASCII, 2 stop bits)/
I started my career in telecom, in 1972, as a bench tech overhauling Teletype machines. I worked on models 28,32, 33 & 35. I used to overhaul two 32 or 33 machines or one 28 or 35 per day.
This post remind me of my first computer in 1981, a Sanio 550 with 1 floppy disk and 128k of memory. Then after a while I add one more flopy and boost the memory to 512K by piggyback the chips and soldering the legs together. Then I need a modem so the most economical way to do it, I bought the volks modem 300 baud which I remove from its case and hot wire it into the computer. It serve me well till I built an Xp out of use parts I got downtown Toronto. Old memory... Tom On Wednesday, September 23rd, 2026 at 9:55 AM, D. Hugh Redelmeier via Talk <talk@lists.gtalug.org> wrote:
From: CAREY SCHUG via Talk <talk@lists.gtalug.org>
Talk about Hayes refers to 1200 baud (or faster), right? Ah, you young people.
The first terminal I owned was a clone of an IBM 2741, with a built-in modem. Think of an IBM Selectric typewriter turned into a terminal. It ran at 110 bits/second. That was a limitation of the typewriter; the modem itself could run at 300 bits/second but there was no connector with which to access it (we did access it with jumper wires).
Anybody remember 300 baud days? And especially the Potomic Micro Magic PMMI-103 modem that would squeeze 600 baud out of the 300 baud spec, running on S-100? A few CBBSes would negotiate that rate. That modem was the first thing I bought, signing up for a pre-sale discount at a Chicago Area Computer Hobbyist Exchange (CACHE) meeting.
I don't remember this 600 baud rate.
From Wikipedia:
The (US) Bell 101 data set (introduced 1958) was 110 bits/second. It was used by the SAGE for North American air defense. https://en.wikipedia.org/wiki/Bell_101 https://en.wikipedia.org/wiki/Semi-Automatic_Ground_Environment
The (US) Bell 103 (1963) modem was what made the 300 bits/second standard. https://en.wikipedia.org/wiki/Bell_103
The Bell 202 (1976) modem is what made 1200 bits/second standard. https://en.wikipedia.org/wiki/Bell_202
CACHE was pretty historic. The first BBS was from members Ward Christensen and Randy Suess. https://en.wikipedia.org/wiki/Bulletin_board_system
After I received it, I waited till there was an S-100 adapter offered for the TRS-80 Model 1, but that was a fraud; I had to wait till another came out. Talk about fun. Modifying S-100 printer and disk controllers to look like TRS-80, and programming modem drivers in hex to connect it to BASIC. Also putting 64K memory into the base unit and programming the extra 16K as a printer buffer.
Wow. How did you access 64k of RAM when some of the address space was for the ROM? I seem to remember the ROM was at low addresses, complicating CP/M.
Often i8080 and Z80 interrupt hardware injected RST instructions. These were 1 byte instructions that could call instructions in one of 8 locations, 8 bytes apart, starting at 0. Fixing the content of those locations as ROM might be a problem.
Surprisingly, interrupts weren't very important in PC operating systems in that era.
Certainly the main program I wrote for that architecture wanted to control that memory -- a 1-byte subroutine call is quite a bit more compact than a 3-byte call. ------------------------------------ Description: GTALUG Talk Unsubscribe via Talk-unsubscribe@lists.gtalug.org Start a new thread: talk@lists.gtalug.org This message archived at https://lists.gtalug.org/archives/list/talk@lists.gtalug.org/message/3B2XFYW...
Man, all these talk about modem... I still have - USRobotics -- 1200baud, I think. No indication about speed from outside. - AOpen -- 56k baud. I was thinking about taking them to Hacklab's junk independence day, but it's not worth the drive and parking.
On Sun, Sep 20, 2026 at 08:20:22PM -0400, Colin McGregor via Talk wrote:
Blasts from the past. Back in the day (think 30-40 years ago), if you wanted to connect to another computer over the phone lines you would get a Hayes (or Hayes compatible) modem (yes, okay there were some non-Hayes compatible modem out there, but), then connect that to your IBM, Commodore, Atari, Apple, or .... computer, run a terminal program, type a command along the lines of ATDP5551212 (or whatever) to get your computer to connect to a local electronic BBS (Bulletin Board System) (likely NOT Internet connected). In its own way, back in the day it was all good (legal) fun.
I was reminded of the above due to another blast from the past recently. I ran across the current issue of "2600" magazine for sale at an Indigo Bookstore. Back in the day "2600" carried articles about things you could do of ...questionable legality... with the telephone network. You get the impression that phone ...tricks.... are still an area that would be happy to write about. What drew my attention in the current issue of "2600" was an article titled "Bulletin Board Systems Are Back!". In summary, it went into using an ESP8266 (think an earlier/cheaper version of an ESP32, semi-Arduino compatible module with built-in WiFi) as what would appear to your computer as a Hayes compatible modem. You do need to assemble an ESP8266 module and an RS232 to TTL module total cost if ordered from one of the usual suspects (like AliExpress in China) under $10. Assemble the parts, install the appropriate software (which they identify in the article) and you can connect to any computer on the internet that supports telnet connections (these days, most don't).
Still this does mean even machines like the Commodore 64, Atari 800 or other machines of that vintage can (with an RS232 adapter) can (conditionally) connect to the Internet or they can host a BBS. Neat stuff...
Certainly my C64U can connect to BBSs on the internet (ie telnet) through the modem emulation of the built in ESP32. -- Len Sorensen
participants (10)
-
CAREY SCHUG -
Colin McGregor -
D. Hugh Redelmeier -
Don Tai -
Howard Gibson -
James Knott -
Lennart Sorensen -
Scott Allen -
tom.fran -
William Park