On 09/23/2026 8:54 AM CDT D. Hugh Redelmeier via Talk <talk@lists.gtalug.org> wrote:
The (US) Bell 103 (1963) modem was what made the 300 bits/second standard. https://en.wikipedia.org/wiki/Bell_103
I don't know how they did it, since that is less than one sine wave for some tones, but they did. Maybe using the slop of the wave?
CACHE was pretty historic. The first BBS was from members Ward Christensen and Randy Suess. https://en.wikipedia.org/wiki/Bulletin_board_system
yes, and their system could handle 600 BAUD. And i think they had the first multi-user BBS later. I have printed session logs and (if readable) logs on 5.25" trs-80 formatted disks. also other early BBS systems, mostly apple based ones, as my friends at the time were mostly apple 2.
Wow. How did you access 64k of RAM when some of the address space was for the ROM? I seem to remember the ROM was at low addresses, complicating CP/M.
I bank swapped the first 16k with the extra memory. as a printer buffer, I only needed it for a moment, when fetching/storing to the buffer. The hard part was removing power from the sockets to add the xtra address line and put in 64k drams. I also planned the hardware to bank swap the 64k 4 times with 256k drams, but didn't feel up to programming the extra 192k as a ram-disk I also toyed with trying to run real CP/M, but, again, initializing the system with a radio shack disk then having to modify cp/m from 8 inch disks was never gotten around to before I bought my first IBM PC clone, and the TRS-80 lost its floppy drives to the IBM. It would have taken a lot of modifications to cp/m to bank swap in the keyboard and display as needed, and iirc cp/m kinda counted on a 24x80 display