I have an Acer C720 Chromebook with Bodhi Linux installed. I wanted to test Debian Jessie on the machine, so I physically removed the SSD and plugged in a 32GB USB stick (SanDisk Cruzer Ultra Fit, USB3). I installed Jessie on it (on an ext4 partition), and added a 5GB or so vfat partition on the end. When I attempt to boot from the USB stick, GRUB comes up and works fine, but things go sideways after that. Here are some of the errors that I've copied ("..." indicates dropped lines, mostly duplications): ----- usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 ... usb 2-1: device not accepting address 3, error -62 [repeated several times with different numbers] ... xhci_hcd 0000:00:14.0: Command completion event does not match command ... Gave up waiting for root device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/disk/by-uuid/44621e45-2a15-4637-d0b8-282b63c8194b does not exist. Dropping to a shell! modprobe: module ehci-orion not found in modules.dep ... (initramfs) ----- I've got another laptop that runs permanently off a USB stick. Yes, I know it's a bad idea: the point is, it can be done - and in this instance it's meant as a temporary measure, a test of Jessie on this machine. I've checked the UUID of the partition in another machine, and it's set correctly. I tinkered with the GRUB kernel command line arguments: Debian had inserted a number of "hints" (sorry, haven't copied this part out) referring to which partition to boot from. I think they said "hd1,msdos1" and I changed them all (three?) to "hd0,msdos1" which caused the boot process to last longer and look more promising, but it again eventually failed out not being able to find itself. The Chromebook has two USB ports, one USB2 and one USB3: the failure is the same (or very similar) booting from both. My first reaction has been that something about the USB stick itself is too new - but Linux mounts it fine and installed to it okay. The "ehci-orion" doesn't make much sense: "Orion" seems to be an ARM chipset, and the Chromebook has an Intel Celeron 2955U in it. Any help appreciated. -- Giles http://www.gilesorr.com/ gilesorr@gmail.com
Hi Giles, Debian Jessie is running 3.16 which doesn't support c720 hardware. If you want to try out Debian, you either need to install wheezy ( but that kernel doesn't support touchpad), or install any kernel that is version 3.17 or above. I suggest you download one from experimental and install it manually -- https://packages.debian.org/experimental/kernel/linux-image-3.19.0-trunk-amd... I've been running it for a few months on my c720 without any issues. Alex. [alex@alex-c720[09:50:47]:~] $ uname -a Linux alex-c720 3.19.0-trunk-amd64 #1 SMP Debian 3.19-1~exp1 (2015-02-12) x86_64 GNU/Linux [alex@alex-c720[09:52:25]:~] $ dpkg --list | grep 3.19.0 ii linux-image-3.19.0-trunk-amd64 3.19-1~exp1 amd64 Linux 3.19 for 64-bit PCs On 01/04/15 09:08 AM, Giles Orr wrote:
I have an Acer C720 Chromebook with Bodhi Linux installed. I wanted to test Debian Jessie on the machine, so I physically removed the SSD and plugged in a 32GB USB stick (SanDisk Cruzer Ultra Fit, USB3). I installed Jessie on it (on an ext4 partition), and added a 5GB or so vfat partition on the end. When I attempt to boot from the USB stick, GRUB comes up and works fine, but things go sideways after that. Here are some of the errors that I've copied ("..." indicates dropped lines, mostly duplications):
-----
usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 ... usb 2-1: device not accepting address 3, error -62 [repeated several times with different numbers] ... xhci_hcd 0000:00:14.0: Command completion event does not match command ... Gave up waiting for root device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/disk/by-uuid/44621e45-2a15-4637-d0b8-282b63c8194b does not exist. Dropping to a shell! modprobe: module ehci-orion not found in modules.dep ... (initramfs)
-----
I've got another laptop that runs permanently off a USB stick. Yes, I know it's a bad idea: the point is, it can be done - and in this instance it's meant as a temporary measure, a test of Jessie on this machine. I've checked the UUID of the partition in another machine, and it's set correctly. I tinkered with the GRUB kernel command line arguments: Debian had inserted a number of "hints" (sorry, haven't copied this part out) referring to which partition to boot from. I think they said "hd1,msdos1" and I changed them all (three?) to "hd0,msdos1" which caused the boot process to last longer and look more promising, but it again eventually failed out not being able to find itself. The Chromebook has two USB ports, one USB2 and one USB3: the failure is the same (or very similar) booting from both.
My first reaction has been that something about the USB stick itself is too new - but Linux mounts it fine and installed to it okay. The "ehci-orion" doesn't make much sense: "Orion" seems to be an ARM chipset, and the Chromebook has an Intel Celeron 2955U in it.
Any help appreciated.
On Wed, Apr 01, 2015 at 09:57:44AM -0400, Alex Volkov wrote:
Hi Giles,
Debian Jessie is running 3.16 which doesn't support c720 hardware. If you want to try out Debian, you either need to install wheezy ( but that kernel doesn't support touchpad), or install any kernel that is version 3.17 or above. I suggest you download one from experimental and install it manually -- https://packages.debian.org/experimental/kernel/linux-image-3.19.0-trunk-amd...
I've been running it for a few months on my c720 without any issues.
Debian's 3.16 kernel has support for the C720 as of mid january. See http://bugs.debian.org/774209 -- Len Sorensen
On Wed, Apr 01, 2015 at 09:08:34AM -0400, Giles Orr wrote:
I have an Acer C720 Chromebook with Bodhi Linux installed. I wanted to test Debian Jessie on the machine, so I physically removed the SSD and plugged in a 32GB USB stick (SanDisk Cruzer Ultra Fit, USB3). I installed Jessie on it (on an ext4 partition), and added a 5GB or so vfat partition on the end. When I attempt to boot from the USB stick, GRUB comes up and works fine, but things go sideways after that. Here are some of the errors that I've copied ("..." indicates dropped lines, mostly duplications):
-----
usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 ... usb 2-1: device not accepting address 3, error -62 [repeated several times with different numbers]
That to me says either the USB key, the USB port, or (pretty unlikely) the USB driver is broken. It is certainly failing to start USB properly.
xhci_hcd 0000:00:14.0: Command completion event does not match command ...
Well xhci is USB3. Some USB3 controllers (In my experience ASMedia) are awful and unstable in linux. Try the USB2 port instead to see what happens then. -- Len Sorensen
participants (3)
-
Alex Volkov -
Giles Orr -
Lennart Sorensen