Re: [GTALUG] gmane.org gone, at least for now
<snip>
https://web.archive.org/web/20150727001119/http://spark.crystalorb.net/mikem...
and the reconfiguring of the endpoint solved the problem...
Hmm, my mobile says this: Wayback Machine doesn't have that page archived.
Soo, am thinking, in your case... motherboard... --> bios? Is xHCI hand-off enabled in bios settings? (we are using intel... - also, btw eHCI hand-off should be disabled) or still usb 3 issue, passthrough?
other than that it sounds like a frustrating and entertaining problem (although it is solved for everyone else afaict :) )
I'm not sure this is a real solution but this guy plugged in a USB 2 device in the 3.0 port on boot and it initialized the port as 2.0. http://forum.kodi.tv/showthread.php?tid=101903
Andre --- Talk Mailing List talk@gtalug.org https://gtalug.org/mailman/listinfo/talk
On Sun, 31 Jul 2016 14:09:34 -0400 Russell Reiter <rreiter91@gmail.com> wrote:
<snip>
Soo, am thinking, in your case... motherboard... --> bios? Is xHCI hand-off enabled in bios settings? (we are using intel... - also, btw eHCI hand-off should be disabled) or still usb 3 issue, passthrough? other than that it sounds like a frustrating and entertaining problem (although it is solved for everyone else afaict :) )
I'm not sure this is a real solution but this guy plugged in a USB 2 device in the 3.0 port on boot and it initialized the port as 2.0. http://forum.kodi.tv/showthread.php?tid=101903
This could work also, cool easy solution Russel :) afaict the original problem was solved when the endpoint was recalculated each time (sync xhci), so if not resolved then it should be something else, like bios, usb 3 pass, etc - to reconf as usb 2 should also work? Andre
participants (2)
-
ac -
Russell Reiter