Thanks KevinI will give that a try.Abby Sent from my Samsung device -------- Original message -------- From: Kevin Cozens <kevin@ve3syb.ca> Date: 08-07-2015 16:39 (GMT-05:00) To: talk@gtalug.org Subject: Re: [GTALUG] UEFI bios/firmware On 15-08-07 03:41 PM, Steve Harvey wrote:

    1) getting the attention of the firmware that runs on initial startup before the operating system (Windows or Linux) gets to start,  and

    2) navigating the setup menus to disable the UEFI.

Once you find the UEFI settings in the BIOS you may find that access to it is disabled. You will most likely need to set a supervisor password for the BIOS before it will let you have access to the UEFI settings. Just remember to remove the supervisor password when you are done (if you don't want/need it). -- Cheers! Kevin. http://www.ve3syb.ca/           |"Nerds make the shiny things that distract Owner of Elecraft K2 #2172      | the mouth-breathers, and that's why we're                                  | powerful!" #include <disclaimer/favourite> |             --Chris Hardwick --- Talk Mailing List talk@gtalug.org http://gtalug.org/mailman/listinfo/talk ​​​​​​​​​