Modem/router replacement?
I have been using the same DSL modem for ages (I think I might have bought it from iStop), and it continues to work pretty well. However, because it has a router in front of it, whenever I have a problem tech support wants me to plug it directly into my computer and run the PPPoE from there to eliminate the router as the source of the problem. A brief, magically resolving problem over the weekend has brought up two things that I would like to know from the list's vast knowledge. 1) How do I run a PPPoE connection from Linux, preferably from the command line? 2) If I want to buy a new modem as a spare, do people have recommendations, and should it include a router? Thanks!
I don't use DSL so I can't help with the PPPoe. But as for a spare modem.You maybe surprise to find Value Village has them often! . I have found several Routers that are upgradable to DD-WRT for $5 Example the other day I picked this one up for $5.99. http://www.cnet.com/products/linksys-wrt400n-simultaneous-dual-band-wireless... On Mon, Apr 18, 2016 at 7:56 AM, William Witteman <wwitteman@gmail.com> wrote:
I have been using the same DSL modem for ages (I think I might have bought it from iStop), and it continues to work pretty well. However, because it has a router in front of it, whenever I have a problem tech support wants me to plug it directly into my computer and run the PPPoE from there to eliminate the router as the source of the problem.
A brief, magically resolving problem over the weekend has brought up two things that I would like to know from the list's vast knowledge.
1) How do I run a PPPoE connection from Linux, preferably from the command line?
2) If I want to buy a new modem as a spare, do people have recommendations, and should it include a router?
Thanks! --- Talk Mailing List talk@gtalug.org https://gtalug.org/mailman/listinfo/talk
| From: William Witteman <wwitteman@gmail.com> | 1) How do I run a PPPoE connection from Linux, preferably from the command line? I imagine that that depends on the distro. On ancient systems, PPPoE was handled by Roaring Penguin's PPPoE. Roaring Penguin is Dianne Skoll's company in Ottawa. $ man -k adsl adsl-connect (8) - Shell script to manage a PPPoE link adsl-setup (8) - Shell script to configure Roaring Penguin PPPoE client adsl-start (8) - Shell script to bring up a PPPoE link adsl-status (8) - Shell script to report on status of PPPoE link adsl-stop (8) - Shell script to shut down a PPPoE link ifcfg-ppp0 [pppoe] (5) - Configuration file used by adsl-start(8), adsl-stop(8), adsl-status(8) and adsl-connect(8) I don't know what modern systems use. I've configured PPPoE with Network Manager on CentOS 6. I've not yet had to use CLI or learn anything about it. | 2) If I want to buy a new modem as a spare, do people have | recommendations, and should it include a router? They all come with routers. Generally, if you don't provoke the router, it doesn't interfere. So a PPPoE stream will just pass through it. If you start handing it DHCP queries on its LAN side it will start doing PPPoE itself. I don't know all the things that will provoke it. I have a couple of PPPoE connections with modem/routers where I have my own thing (a computer) doing the PPPoE. Not much problem. I don't trust routers in my house that have been provided by Rogers or Bell. My routers are home made out of PCs. More than a bit quixotic. My ADSL modem is an old cheap TP-Link TD-8816. It replaced another modem that went south a few years ago. My VDSL modem has to be provided by Bell since the Stinger box upstream doesn't conform to the VDSL2 specs. They retain too much control over it for me to want to give it access to my LAN. Rogers modems are similar but you don't have to deal with PPPoE.
participants (3)
-
D. Hugh Redelmeier -
Digiital aka David -
William Witteman