With all the CPU cache fencing going on I thought it might be fun to fiddle with NVM express on Fedora 27. My primary SSD on this z370-A, was/is in build limbo while I updated bios and waited for outcomes. I installed a 32gib module from Newegg ($90 delivered) and I booted from F27-workstation live on usb. I let the anaconda installer do the automatic partitioning. 5gib of the 32gib reported was left unallocated for over-provisioning. First boot appeared to be twice as fast as on the SATA SSD. Three or four seconds to get to the gui login as opposed to 7 or 8 on the original drive. Had to install hdparm from the repo. # hdparm -tT --direct /dev/sda1 /dev/sda1: Timing O_DIRECT cached reads: 930 MB in 2.00 seconds = 464.92 MB/sec Timing O_DIRECT disk reads: 1370 MB in 3.00 seconds = 456.30 MB/sec # hdparm -tT --direct /dev/nvme0n1 /dev/nvme0n1: Timing O_DIRECT cached reads: 2302 MB in 2.00 seconds = 1151.84 MB/sec Timing O_DIRECT disk reads: 3474 MB in 3.00 seconds = 1157.65 MB/sec More info on Nvme with a nice diagram of the Linux storage stack here. https://en.m.wikipedia.org/wiki/NVM_Express I switched back to the original SSD. An os-probe mapped the device to /dev/dm-1 and I was able to remake grub.conf and add this install to the bootloader on that drive. A couple of switches back and forth between drives and it looks like the 10% performance hit I had experienced after the microcode updates, is now somewhat reduced, +-5%. Guilding the lilly a bit, as I didn't have any day to day problems with performance. Although it's hard to name Intel's product actions around this issue a field of Lilly's. -- Russell