15+ years ago i was looking at them, good ones were like 200$, i bought the 30-40$ type, because i wasn't spending 200$. My company had the 200+$ type. If you are careful, i got the cheap type to work 98% of the time. Easy enough to test, and cut of end and re-punch. I found my cheap one doesn't always line up over the copper it presses down perfectly, so just have to be aware of that, as well, it need a good amount more hand strength, as the good ones leverage well or have ratchet. So I actually two hand with my cheap type. 200$ one can also be driven over by car, and still work, but not really a requirement I had for the home one :). Also didn't have need for 4line punch and other options, just RJ45. Also wonder, if the ends can have various qualities and compensate some what. -tl On Wed, Jun 15, 2016 at 11:43 PM, William Park via talk <talk@gtalug.org> wrote:
I want to buy RJ45 (8c8p) crimper, so that I can make ethernet cable of exact length I need. Which brand is good quality?
Sent from Yahoo Mail on Android <https://overview.mail.yahoo.com/mobile/?.src=Android>
--- Talk Mailing List talk@gtalug.org https://gtalug.org/mailman/listinfo/talk