On 5/9/20 7:25 PM, Stewart C. Russell via talk wrote:
On 2020-05-07 4:09 p.m., Alvin Starr via talk wrote:
The headers and cables tended to be pretty standard.
Thanks, Alvin. TIL I learned that they're actually not. Well, there's one standard, and there's the thing that ASUS uses. Guess who bought a "standard" cable but has an ASUS motherboard?
The "standard" way assumes an IDC 10-way header on the motherboard and an IDC 9-pin RS-232 connector on the other end. Because of the difference in pin ordering, a straight-through ribbon cable ends up mapping header pins 1-9 to 1, 6, 2, 7, 3, 8, 4, 9.
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
Someone once said. "The nice thing about standards is that there are so many to chose from" I have had good luck with Asus boards over the years but its been a long time since I plugged in a serial port. That sucks that the pin layout no longer supports headers and ribbon cables.
You can see the pinout for this on a weird little embedded 386SX clone I have (ZF MicroSystems OEMmodule): https://archive.org/details/zf_systemcard_technical/page/10/mode/2up
ASUS, bless 'em, decided that they should be different and mapping header pins 1-9 to RS-232 connector pins 1-9. More logical, maybe, but it means you can never use IDC 9-pin connectors with an ASUS board.
I've rewired it and all is well.
There are a number of programs for managing serial ports but I have had reasonably good luck with minicom.
minicom's usually my go-to program too. One of my devices insists on talking 7M1, and minicom can't set that as a default. I had to compile the venerable C-Kermit for out-the-box mark parity support. C-Kermit doesn't come as an Ubuntu package, and building it is a bit special. CUNY stopped supporting it (and Frank) in 2011, so development has slowed way down. A shame, 'cos you can bootstrap Kermit using almost anything and end up with a robust 8-bit file transfer path.
I know people still using UUCP. So not all serial communications are dead.
cheers, Stewart --- Post to this mailing list talk@gtalug.org Unsubscribe from this mailing list https://gtalug.org/mailman/listinfo/talk
-- Alvin Starr || land: (647)478-6285 Netvel Inc. || Cell: (416)806-0133 alvin@netvel.net ||