On Wed, Aug 13, 2003 at 10:51:13PM -0400, Max Blanco wrote:

Thanks Lennart(All)... but no luck yet. see below:

On Wed, 13 Aug 2003, Lennart Sorensen wrote:

...

On Wed, Aug 13, 2003 at 05:24:17PM -0400, Max Blanco wrote:

...

Maybe I should, but I haven't any use for ppp.

Ah. OK.

pppconfig gave me "set modem manually" as the only option. 8(

...

Well I would imagine that Linux uses /dev/ttyS0 - ttyS3 for serial ports. What does 'dmesg |grep tty' show you?

bingo: tty00 at somehex1 (irq = 15) is a Z8530 ESCC; port = modem tty01 at somehex2 (irq = 16) is a Z8530 ESCC; port = printer

tried tty00 and tty01. no luck. so I wrote a simple script that tried ttyS* tty0* cua* to no avail.

the modem is on. the modem is plugged in to the line. the modem works well in macos.

Perhaps using some setserial command to setup /dev/ttyS0 on the hex and irq given would work. Don't usually bother specifying the uart or anything like that. Might work. /usr/share/doc/setserial/ might have useful hints in it. Lennart Sorensen -- The Toronto Linux Users Group. Meetings: http://tlug.ss.org TLUG requests: Linux topics, No HTML, wrap text below 80 columns How to UNSUBSCRIBE: http://tlug.ss.org/subscribe.shtml